Yamaha R1 09-14

Graves Motorsports Exhaust Silencer Repack Kit - Diamond

  Graves Motorsports Diamond Silencer Repack Kit. Over time the internal packing materials of an exhaust can deteriorate. When this happens the integrity / performance of the exhaust canister will become compromised and cause damage to the canister...

Graves Motorsports Exhaust Silencer Repack Kit - Octagon

  Graves Motorsports Octagon Silencer Repack Kit. Over time the internal packing materials of an exhaust can deteriorate. When this happens the integrity / performance of the exhaust canister will become compromised and cause damage to the canister...

Graves Motorsports 3 in 1 Socket R1

  Graves Motorsports 3 in 1 Socket is a direct fitment for the steering castle nut on the 98-14 Yamaha R1. This 3/8 inch drive socket is made from 7075 Aluminum and is anodized black. It fits the steering head castle nut, swing-arm pivot castle...

Graves Motorsports Exhaust Silencer Repack Kit - Oval

  Graves Motorsports Oval Silencer Repack Kit. Over time the internal packing materials of an exhaust can deteriorate. When this happens the integrity / performance of the exhaust canister will become compromised and cause damage to the canister. To...

Kawasaki ZX-4RR WORKS Clutch Spring Kit

  Kawasaki ZX-4RR WORKS Kit Clutch Springs for the 2023 + models. Kit Springs provide improved feel and a stronger spring rate for better clutch engagement. FITMENT: Kawasaki Kawasaki ZX-4RR +

Ninja 400 WORKS Clutch Spring Kit

  Kawasaki Ninja 400 WORKS Kit Clutch Springs for the 2018-2023 models. Kit Springs provide improved feel and a stronger spring rate for better clutch engagement. FITMENT: Kawasaki Ninja 400 2018 +

Graves Motorsports Rear Axle Alignment Tool R1 R6

  Graves Motorsports Rear Axle Alignment Tool for the 99-22 + Yamaha R6, 06-09 R6S and 98-22 + Yamaha R1 The Rear Axle Alignment Tool is made from ultra-durable Delrin and is used to push your rear axle out and hold your rear brake caliper mount in...

Graves Motorsports Rear Axle Alignment Tool Kawasaki ZX6R ZX10R

  Graves Motorsports Rear Axle Alignment Tool for the ZX-6R and ZX-10R (years listed below). The Rear Axle Alignment Tool is made from ultra-durable Delrin and is used to push your rear axle out and hold your rear brake caliper mount in place while...

Works Bar Radiator Cap

  Works 2.0 Bar Radiator Cap. This radiator cap is designed to keep your engine from overheating by maintaining a higher pressure inside the cooling system thus increasing the boiling point of your coolant. Fitment: Most Japanese Sportbike Models...

Graves Aluminum Sport Bike Valve Stems

  Graves' Aluminum Valve Stems are 11.3mm in size and come in Black. These sport bike valve stems are sold in a pack of 2 and fit most Japanese OEM wheels. These Aluminum 90 degree valve stems are for use with tubeless tires only. They attach...

Graves Motorsports 6mm Sport Bike Swingarm Spools

The Graves Motorsports swingarm spool kits are available in 6mm then hard anodized in black and finished with laser etching. They are a direct fitment for motorcycle swingarm spools on bikes that have threaded spool bosses in the 6mm sizing. These units...

Galespeed Master Brake Switch Kit Multi

  Galespeed Master Brake Switch Kit. This switch sensor wires into your bikes factory harness to allow activation of the brake light when your Galespeed master cylinder lever is applied. NOTE: This switch fits the VRC16 (18-16mm ratio), VRC17...