2009-2014

Graves Motorsports Yamaha R1 Suspension Link 09-14

  Graves Motorsports R1 suspension linkages are the result of continued testing and race experience on the Yamaha R1. These are an improvement for any level of rider. This linkage system can be found on many Yamaha R1 race bikes including Team Zyvax...

Galespeed Thumb Brake Master Cylinder 12mm

Galespeed 12mm Thumb brake master cylinder enables rear brake operation when the foot brake cannot be used like in deep right side banking. Along with improving difficult situations for your feet dramatic improvements in traction control, grip recovery,...

Galespeed Rear Brake Master Cylinder - 90 Degree Reservoir

Galespeed Rear Brake Master Cylinder - 90 Degree Reservoir. The GALE SPEED rear master cylinder set the piston diameter to φ12 and was designed to match the general racing footpeg lever ratio. This allows for an exclusive and controllable...

Galespeed Rear Brake Master Cylinder - 45 Degree Reservoir

Galespeed Rear Brake Master Cylinder - 45 Degree Reservoir. The GALE SPEED rear master cylinder set the piston diameter to φ12 and was designed to match the general racing footpeg lever ratio. This allows for an exclusive and controllable...

Graves Motorsports Yamaha R1 Top Velocity Stacks 09-14

  Graves Motorsports Yamaha R1 Top Velocity Stacks for the 2009-2014 models. This "Upper" or "Top" velocity stack is sold separately from the lower billet machined piece shown in picture ( Lower Part # ABY-09R1-REVB). See below for full details and...

FlashTune ECU Type 2 Yamaha R1 09-14 Bench Kit

Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: The "Bench" kit listed here and separate listed "Bike Side" do the exact...

Galespeed Thumb-Brake Rear Brake Master Cylinder

Galespeed Thumb-Brake Rear Brake Master Cylinder - The GALE SPEED rear master cylinder has a 12mm piston diameter and was designed to match the general racing lever ratio . Forged 6061 and 3D machined body with a T6 heat treatment for strength and...

Ohlins 68mm Motorcycle Steering Damper

  Ohlins 68mm Motorcycle Steering Damper. The 68mm is a universal damper that can be used on a variety of motorcycles. Some will require custom mount kits. Others the kit can be retrofitted into the OEM mounting spot.   ZX-10R 11-23 (mounts...

Galespeed VRD Master Cylinder 19mm

  Galespeed VRD 19mm (Variable lever Ratio Control) master cylinders. Galespeed designed & developed "Variable lever Ratio Control" gives you wider lever ratio adjust range (0.25mm per click, 8 clicks/max. 2mm adjust range - *from supporting...

Galespeed VRD Master Cylinder 17mm

  Galespeed VRD 17mm (Variable lever Ratio Control) master cylinders. Galespeed designed & developed "Variable lever Ratio Control" gives you wider lever ratio adjust range (0.25mm per click, 8 clicks/max. 2mm adjust range - *from supporting...

Galespeed VRD Master Cylinder 16mm

  Galespeed VRD 16mm (Variable lever Ratio Control) master cylinders. Galespeed designed & developed "Variable lever Ratio Control" gives you wider lever ratio adjust range (0.25mm per click, 8 clicks/max. 2mm adjust range - *from supporting...

Galespeed Clutch Perch Kit Lever Ratio 32-34mm

  Galespeed Clutch Perch Kit (short lever). Wire Clutch Perch Kit Standard Clamp with the Lever Ratio: 32/34mm. These advanced cable drawn perches are adjustable from 32 - 34mm ratios, have a lever lockout feature and connector or electronic...