FEULING OIL PUMP CORP.

Feuling Oil Pump Corp. Spring And Valve Remover 9001

For easy removal and installation of pressure relief spring, by-pass valve and roll pin Holds relief spring down and away from roll pin Made in the U.S.A.. TOOL OIL PUMP PIN MILW8

Feuling Oil Pump Corp. Sump Plug - 6 Pack 3116

Eliminates blocking the internal engine case scavenge pick up hole The M8 main sump cross port on the inside of the M8 engine case is in a slightly different location & height in each engine case...

Feuling Oil Pump Corp. Sump Plug 3115

Ensures the cross sump port is wide open and allows the oil pump to pull as much as possible from the sump. PLUG SUMP OE 765

Feuling Oil Pump Corp. Tire Pressure Gauge 9047

Tire Gauge with 0-60 PSI read out for use on standard schrader valves. GAUGE TIRE PRESS 0-60 PSI

Feuling Oil Pump Corp. Titanium Valve Spring Retainer Kit 1110

Titanium Valve Spring Retainer Kit for M8 models Made in the U.S.A. . RETAINER TI KIT -0.050 M8

Feuling Oil Pump Corp. Titanium Valve Spring Retainer Kit 1208

Titanium Valve Spring Retainer Kit for M8 models Made in the U.S.A. . RETAINER TI KIT +0.050 M8

Feuling Oil Pump Corp. Titanium Valve Spring Retainer Kit 1221

Can be used to upgrade Screamin' Eagle performance Beehive« valve springs to titanium retainers Can be used on Feuling« Econo Beehive« valve springs kits to update steel retainers to titanium Made in...

Feuling Oil Pump Corp. Twin Cam Evo Crankshaft Runout Measuring Tool 9015

The tool gives quick and accurate readings of the engines crank pinion shaft run out and makes for a great display to show and explain to customers the condition of their crankshaft The tool mounts...

Feuling Oil Pump Corp. Valve Guide Tool 9024

Machine valve spring seats for proper installed spring height and spring cup fitment Cutter bodies and pilots are interchangeable Hardened pilots fit all 3/8 and hand drills For valve guides with 6...

Feuling Oil Pump Corp. Valve Locks 1206

Offset locks raise retainer to gain .050" installed height Titanium locks are offset 10? Made in the U.S.A.. KEEPERS VLV.05 OFSET 5/16

Feuling Oil Pump Corp. Valve Locks 1212

Offset locks raise retainer to gain .050" installed height Titanium locks are offset 10? Made in the U.S.A.. LOCKS VALVE STD 5/16

Feuling Oil Pump Corp. Valve Locks 1213

Offset locks raise retainer to gain .050" installed height Titanium locks are offset 10? Made in the U.S.A.. KEEPERS VALVE 7MM 8PK