Handlebars

La Choppers 1-1 4" Twin Peaks Big Twin Handlebar La736013M

A new twist on the Ape Hanger handlebar Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for throttle-by-wire capability 3-1/2" on-center knurling Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge...

La Choppers 1-1 4" Twin Peaks Big Twin Handlebar La736010M

A new twist on the Ape Hanger handlebar Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for throttle-by-wire capability 3-1/2" on-center knurling Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge...

La Choppers 1-1 4" Twin Peaks Hefty Big Twin Handlebar La736216B

Measures 1.25" in the handlebar clamping area Must use risers that accept handlebars with a 1-1/4" clamping area Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for Throttle-by-Wire capability 3-1/2" on-center knurling...

La Choppers 1-1 4" Twin Peaks Hefty Big Twin Handlebar La736213B

Measures 1.25" in the handlebar clamping area Must use risers that accept handlebars with a 1-1/4" clamping area Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for Throttle-by-Wire capability 3-1/2" on-center knurling...

La Choppers 1-1 4" Twin Peaks Hefty Big Twin Handlebar La736210B

Measures 1.25" in the handlebar clamping area Must use risers that accept handlebars with a 1-1/4" clamping area Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for Throttle-by-Wire capability 3-1/2" on-center knurling...

La Choppers 1-1 4" Twin Peaks Big Twin Handlebar La736019B

A new twist on the Ape Hanger handlebar Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for throttle-by-wire capability 3-1/2" on-center knurling Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge...

La Choppers 1-1 4" Twin Peaks Touring Handlebar La736108B

Handlebars with an emphasis on touring comfort More parallel wrist angles for a perfect pullback angle and stress-free riding Flowing bends on the uprights designed specifically for Batwing fairing bikes Drilled for internal wiring Works with hydraulic...

La Choppers 1-1 4" Twin Peaks Big Twin Handlebar La736016B

A new twist on the Ape Hanger handlebar Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for throttle-by-wire capability 3-1/2" on-center knurling Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge...

La Choppers 1-1 4" Twin Peaks Big Twin Handlebar La736013B

A new twist on the Ape Hanger handlebar Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for throttle-by-wire capability 3-1/2" on-center knurling Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge...

La Choppers 1-1 4" Twin Peaks Big Twin Handlebar La736010B

A new twist on the Ape Hanger handlebar Mitered top with a traditional two-bend bottom Drilled for internal wiring Notched for throttle-by-wire capability 3-1/2" on-center knurling Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge...

Todd'S Cycle 1-1 2" Strip Handlebar 6014887

Require special risers and clamps Polished welds Slotted for internal wiring Notched for electronic throttle Work with OEM heated grips Made in the U.S.A.. HANDLEBAR 1.5" STRIP 14 B

Todd'S Cycle 1-1 4" Touring Handlebar 6013990

Feature 1-1/4" diameter in the clamping area Work with the OEM riser and clamps; have the correct wire exit location Do not need to remove the stock pin in the OEM mount clamps; bars still have more than 35 degrees of adjustment Knurled clamping area...