Engine

Andrews Chain Driven Cam 216812

Allow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life Cam grinds listed are designed to be used...

Andrews Grind Cam 216360

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Andrews Grind Cam 216355

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Andrews Grind Cam 216350

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Andrews Grind Cam 216337

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Andrews Grind Cam 216331

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Andrews Grind Cam 216326

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Andrews Grind Cam 216321

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Andrews Grind Cam 288131

Cams work well with fuel injection or carburetor models Run best with low restriction exhausts (1700-5200 rpm) Works well with carbs or fuel injection Bolt-in cam for more torque with stock compression Can be used with stock valve springs and tappets...

Jims Rocker Shaft & Hardware Kit 5836

4130 stud and nut kit replaces the stock hardware used to secure the rocker shafts Compared to a stock ôboltö, these JIMS manufactured studs allow the technician the assembly finesse required when torqueing the rocker arm shafts on the cylinder head...

S&S Cycle Mr103 Cam Kit 3300470

Bolt-in cam for 103ö Twin Cam motors Use with stock heads and low restriction intake and exhaust Broad torque curve improves output over stock over the entire RPM range Made in the U.S.A.. CAMS MR103C 07-17TC

S&S Cycle 509 Series Grind Cam Kit 3300016

Bolt-in cams for 88 CID engines with stock compression ration Great low and mid-range torque Lower lift allows them to be bolted into stock 96ö-106ö (EU: 2,44 m - 2,69 m) '06 engines with stock valve springs Strongest from 1000-4500 RPM 180 psi (EU:...