Electrical

Dynatek Self-Contained Electronic Ignition Ds13

Totally self-contained for easy installation All components fit under the point cover, replacing the original points Dyna S utilizes all the time-proven Dyna III circuitry but comes in a smaller, condensed package Use with coils having 3-ohm primary...

Dynatek Standard Rev Limiter Drl300Cdi

Effectively prevents your engine's rpm from exceeding a predetermined limit Continuously adjustable from 6,000 to 12,000 rpm Smooth, precise limiting action The DRL-300 has expanded capabilities and will work with most 4-cylinder inductive engines. MAG...

Dynatek Standard Rev Limiter Drl300

Effectively prevents your engine's rpm from exceeding a predetermined limit Continuously adjustable from 6,000 to 12,000 rpm Smooth, precise limiting action The DRL-300 has expanded capabilities and will work with most 4-cylinder inductive engines. DYNA...

Dynatek Ignition Booster Module Dbr1

Boost ignition power in machines with single points-equipped ignition systems Improves performance by transferring inconsistent electrical surges into precisely controlled bursts of energy to the coil for more thorough and efficient combustion No more...

Dynatek Ignition And Coil Kit Dsk61

Complete electronic ignition systems built with the latest state-of-the-art engineering The same ignition used by top drag and road racers to set records and bring home victories over the past decade The Dyna S is completely housed behind the ignition...

Compu-Fire Series-Type Replacement Voltage Regulator 55130

New generation series regulators reduce load on stator and decrease engine drag When not charging, regulator goes to an open circuit, so there is no load on the stator or rotor Wire harness included Made in the U.S.A.. 32A CHR REG 89-99 B.T.

Compu-Fire 10 84 Starter Gear Set 54003

Features a 10-tooth pinion gear and an 84-tooth starter ring gear that produces 15% more starting torque than stock (9:66 ratio) gears Gears are made of 8620 carbonized steel for strength and long life Uses OEM clutch baskets Reduces gear tooth breakage...

Compu-Fire 10 84 Starter Gear Set 54002

Features a 10-tooth pinion gear and an 84-tooth starter ring gear that produces 15% more starting torque than stock (9:66 ratio) gears Gears are made of 8620 carbonized steel for strength and long life Uses OEM clutch baskets Reduces gear tooth breakage...

Accel Solid State Regulator 201121B

High-reliability voltage regulators feature rugged aluminum alloy construction All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against...

Cycle Electric Inc 6V Low Output Generator-Mounted Regulator With Updated End Plate (4-Hole) Ce546

Available in 6V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine Updated end plate is available separately if your current generator is not equipped with...

Cycle Electric Inc 12V Standard Generator-Mounted Regulator With Updated End Plate (4-Hole) Ce540

Available for 12V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine If you have purchased a Cycle Electric generator since 1984 it may have the four-hole end...

PARTS UNLIMITED Starter Motor 2110-0666

Starters are manufactured to meet or exceed OEM specifications Insulated armature for rust and corrosion protection Rubber seals on top and bottom side of unit-ensures dry operation for longer life 90/10 copper bushings for a longer life. STARTER HONDA