Cruiser

S&S Cycle 4-1 4" Bore Cylinder - M8 9100683

Bolt-on cylinder set Bored slightly under nominal size and are not honed Made in the U.S.A.. CYLINDERS 4.25"M8 BLK

S&S Cycle 4-1 4" Bore Cylinder - M8 9100682

Bolt-on cylinder set Bored slightly under nominal size and are not honed Made in the U.S.A.. CYLINDERS 4.25"M8 BLK HL

S&S Cycle Mr103 Cam Kit 3300462

Bolt-in cam for 103ö Twin Cam motors Use with stock heads and low restriction intake and exhaust Broad torque curve improves output over stock over the entire RPM range Made in the U.S.A.. CAMS MR103GD 99-06

S&S Cycle 583 Cam Kit 3300107

Great overall cam for Softail and Dyna Provides strong low-end torque and horsepower Strongest from 1500-5000 rpm. CAMS 583GEAR 99-06

S&S Cycle 551 Series Grind Cam Kit 3300100

Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9 More power across the rpm range, with improved low and midrange torque Can be used with stock pushrods, springs and lifters Strongest from 1,000-4,000 rpm Made in the U...

S&S Cycle 509 Series Grind Cam Kit 3300017

Bolt-in cams for 88 CID engines with stock compression ration Great low and mid-range torque Lower lift allows them to be bolted into stock 96ö-106ö (EU: 2,44 m - 2,69 m) '06 engines with stock valve springs Strongest from 1000-4500 RPM 180 psi (EU:...

S&S Cycle 551 Series Grind Cam Kit 1064868

Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9 More power across the rpm range, with improved low and midrange torque Can be used with stock pushrods, springs and lifters Strongest from 1,000-4,000 rpm Made in the U...

S&S Cycle 475 Series Grind Cam Kit 1064033

Original equipment specifications Bolt-in cam with stock cam timing Does not require tuning Made in the U.S.A.. CAMS 475GEAR 99-06TC

S&S Cycle 640 Series Grind Cam 335270

For 95/96/103/110 cubic-inch engines Compression ratios from 10.5:1 to 11.5:1 Strongest from 3000-6000 rpm High-lift springs and adjustable pushrods required. CAMS W/GEARS 640G 07-17TC

S&S Cycle 625 Series Grind Cam Kit 335269

Strongest from 3000-6000 rpm High-lift springs and adjustable pushrods required. CAMS W/GEARS 625G 07-17TC

S&S Cycle 585 Series Grind Cam Kit 335268

Strongest from 3500-6000 rpm. CAMS W/GEARS 585G 07-17TC

S&S Cycle 570 Series Grind Cam Kit 335267

570G/570C chain drive cams are for 88/96/103 cubic-inch engines with compression ratios between 9:1 and 10:1 Strongest from 3200-3700 rpm. CAMS W/GEARS 570G 07-17TC