DRAG SPECIALTIES

DRAG SPECIALTIES 530 Series O-Ring Chain 1222-0264

Features quad-pin riveting, tough O-ring seals, and solid bushings and rollers Improved wear resistance and strength Average tensile strength 9,500 lb. (EU: 4309,13 kg) Weight saving with high...

DRAG SPECIALTIES 530 Series O-Ring Chain 1222-0265

Features quad-pin riveting, tough O-ring seals, and solid bushings and rollers Improved wear resistance and strength Average tensile strength 9,500 lb. (EU: 4309,13 kg) Weight saving with high...

DRAG SPECIALTIES 530 Series O-Ring Chain 1222-0266

Features quad-pin riveting, tough O-ring seals, and solid bushings and rollers Improved wear resistance and strength Average tensile strength 9,500 lb. (EU: 4309,13 kg) Weight saving with high...

DRAG SPECIALTIES 530 Series Rivet Connecting Link 1225-0176

Replacement connecting link. LINK CON DS 530 O-RING RI

DRAG SPECIALTIES 530 Series Rivet Connecting Link 1225-0178

Replacement connecting link. LINK CON DS 530C O-RNG RI

DRAG SPECIALTIES 54A Charging System 2112-1205

Engineered to provide 30% more power than stock system at idle 54A output at 4000 rpm provides enough power to eliminate dimming lights, reduced audio performance and under-performing heated gear...

DRAG SPECIALTIES 6 Volt Coil 2102-0191

Includes spark plug wires Spark plug wire also available separately. COIL W/WIRES 48-60 BLK/SQ

DRAG SPECIALTIES 6" Flat Rear Fender DS-393500

16-gauge, deep-drawn steel Fender is 41" L x 1-1/4" D Fender bracket not included Raw steel finish. 6" STEEL FENDER BOBBED

DRAG SPECIALTIES 6" Front Fender 1401-0317

Raw stamped steel construction Measure approximately 6" W (inside) Mount with OE hardware Fenders with trim holes require lower fender skirt. FENDER FRT 00-13FLT PLN

DRAG SPECIALTIES 6" Front Fender 1401-0318

Raw stamped steel construction Measure approximately 6" W (inside) Mount with OE hardware Fenders with trim holes require lower fender skirt. FENDER FRT 00-13FLT W/HLS

DRAG SPECIALTIES 6" Front Fender 1401-0323

Raw stamped steel construction Measure approximately 6" W (inside) Mount with OE hardware Fenders with trim holes require lower fender skirt. FENDER FRT 87-99 FLT PLN

DRAG SPECIALTIES 6" Front Fender 1401-0324

Raw stamped steel construction Measure approximately 6" W (inside) Mount with OE hardware Fenders with trim holes require lower fender skirt. FENDER FRT 87-99FLT W/HLS