ANDREWS

Andrews Replacement Pushrod Kit 240030

Pushrods fit Shovel engines using stock diameter tubing so there is no cover tube interference For stock stroke applications Made in the U.S.A.. PUSHROD CHR MLY 66-85 BT

Andrews Replacement Pushrod Kit 240055

Pushrods fit Shovel engines using stock diameter tubing so there is no cover tube interference For stock stroke applications Made in the U.S.A.. PUSHROD ALUM 66-85 BT

Andrews Roller Conversion Cam Sprocket 216015

34 teeth with ignition trigger ring Must use with 99-01 engines with stock ignition 02-06 engines can use stock rear cam drive sprocket Trigger ring required for 99-01 engines with rear cam drive...

Andrews S Grind Cam 212970

Made in the U.S.A. This cam is the Knuckle equivalent of a "B" cam in a Pan/Shovel motor Bolt-in performance cam Smooth idle, strong pull to 6000 rpm. CAMSHAFT S 36-47 BT

Andrews Shifter Fork 209750

One piece cold-forged fork Fully heat treated and black oxide coated Made in the U.S.A.. 74 SHIFT FORK CNTR SHAFT

Andrews Shifter Fork 209760

One piece cold-forged fork Fully heat treated and black oxide coated Made in the U.S.A.. 74 SHIFT FORK MAIN SHAFT

Andrews Supervolt 12 V Ignition Coil 237230

The original Andrews ignition coil adds great performance with a classic look Replacement coils deliver 30,000+ volts Produce more voltage than a stock coil Made in the U.S.A.. COIL IGNITION 4.8OHM...

Andrews Supervolt 12 V Ignition Coil 237240

The original Andrews ignition coil adds great performance with a classic look Replacement coils deliver 30,000+ volts Produce more voltage than a stock coil Made in the U.S.A.. COIL IGNITION 2.8OHM...

Andrews Tw48 Grind Cams 216348

Broad tip cams for baggers with stock motors; max torque at low and mid rpm ranges. CAMS 48H 06 DYNA 07-17 TC

Andrews Tw48 Grind Cams 288148

Broad tip cams for baggers with stock motors; max torque at low and mid rpm ranges. CAM TW48 TC 99-06

Andrews Tw9 Grind Cams 216309

Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel...

Andrews V2 Grind Cams 298120

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods V2 and N2 are bolt-in cams for stock applications designed...