Tools

Motion Pro Shock Spring Compressor 80608

Adapter plates adjust to fit spring retaining collars from 56 mm to 96 mm Includes adapters for both clevis and eyelet type shocks Clevis inside width is 35 mm, Eyelet width is 17 mm Safely removes the spring on most coilover shocks Low friction radial...

High Lifter Alignment Kit 5460868

Camber and toe alignment issues can be solved with High LifterÆs wheel alignment kit Allows for easy and accurate measurements to adjust the vehicles camber and toe Includes: 2 alignment plates, 2 tape measures and a digital angle finder Using both tape...

Jims Sprocket Shaft Holder 1034

Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A.. SPROCKET SHAFT HOLDER

Feuling Oil Pump Corp. Lifter Bore Measuring Kit 9004

Feuling« recommends a lifter to lifter bore clearance of 0.001" - 0.0015" for optimum lifter performance Designed to accurately measure lifter bore diameter and bore roundness Includes sizes; 0.8430", 0.8435", 0.8440", and 0.8450" Made in the U.S.A....

Jims Fuel Tank Wall Mount 5818

Can be used on most one-piece fuel tanks that use 5/16" or 3/8" hardware to mount fuel tank to motorcycle frame Securely holds or displays fuel tank when mounted to wall stud Made in the U.S.A.. MOUNT WALL FUEL TANK MC

Jims Ignition Switch Connector Remover 942

Slip the dog bone end of tool into the bottom side of connector until it is touching the back end of connector box Then gently pull out the male wiring connector and tool Safely removes ignition switch wiring connector Made in the U.S.A.. TOOL IGN SWITCH...

Jims Exhaust Stud Drill Plate 1705

Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made in the U.S.A.. EXHAUST DRILL PLATE

Jims Fork Leg Holder Tool 2251

Mounts in vise to hold fork firmly during repair without causing damage to fork assembly Holds fork legs and tubes for easy hands-free servicing or rebuilding Use on smaller 28 mm or larger fork tubes with a maximum 2ö Will not scratch finish Made in the...

Tecmate Carbmate Ts110

CarbMate displays the difference in vacuum intake settings of two carburetors or throttle bodies very precisely on a single transverse "East-West" 9 LED display - visual estimation errors, common to the traditional approach which is to visually compare...

Motion Pro Fuel Injector Cleaner Kit For Hv2 80615

Push button switch to turn fuel injector on with LED battery condition indicator light Will flush and back flush injectors for best possible cleaning process Fits most OEM HV2 fuel injectors used on motorcycle engines Kit includes fuel injector cleaner...

Motion Pro Fuel Injector Cleaner Kit For Ev1 Ev6 80595

Will flush and back flush injectors for best possible cleaning process Push button switch to turn fuel injector on with LED indicator light Kit includes fuel injector cleaner tool, pigtail and 9V battery Durable anodized billet aluminum construction...

Motion Pro Fuel Injector Cleaner Kit For Ev1 Ev6 80594

Will flush and back flush injectors for best possible cleaning process Push button switch to turn fuel injector on with LED indicator light Kit includes fuel injector cleaner tool, pigtail and 9V battery Durable anodized billet aluminum construction...