ANDREWS

Andrews Low-Profile Lower Spring Collars 277160

Similar to the late H-D collars Will provide .060" more spring travel than stock collars Made in the U.S.A.. LOW-PRO LWR COLR 57-85 XL

Andrews M462 Cam 217462

Bolt-in cam 107ö-114ö engines Big power; 127 ft lb and 109 hp (from 1200 to 5500 rpm). CAM M462 17-19 M8

Andrews M464 Cam 217464

Great mid-range torque and power with free-flow exhaust pipes and injector tuning. CAM M464 17-19 M8

Andrews Medium-Lift Upper Spring Collar Set 276150

Intended to work with stock springs and add approximately .060" spring travel with no other modifications on 66-84 74" and 80" motors The easy way to install B or #2 cams in stock heads Made in the U...

Andrews N Grind Cam 212965

Stock Knuckle replacement cam For stock motors and restoring an older classic engine, this is the cam to use Made in the U.S.A.. CAMSHAFT N 36-47 BT

Andrews N2 Grind Cams 298125

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.. ANDREWS N2 CAM 91-99 XL

Andrews N2 Grind Cams 298130

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.. ANDREWS N2 CAM 00-19 XL

Andrews N3 Grind Cams 298135

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods N3 cams are bolt-in for 05-16 883/1200 engines with stock...

Andrews N4 Grind Cams 298145

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.. ANDREWS N4 CAM 91-99 XL

Andrews N4 Grind Cams 298150

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.. ANDREWS N4 CAM 00-19 XL

Andrews N6 Grind Cams 298165

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A. N6 designed for modified 1200s to 80"...

Andrews N6 Grind Cams 298170

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A. N6 designed for modified 1200s to 80"...